PROGRAMMING Page 25
ADVANCED PROGRAMMING
CLI CALL
DURATION
(CLI)
(seconds, from 00 to 99; factory default 10)
DTMF
GENERATOR
(INST)
(from 1 to 9; factory default 2;
DTMF duration=X*50 ms)
MULTI-LINK
FUNCTION
(INST)
(from 0 to 9; 1=master, 0=function disabled)
RELAY SETTING
(INST)
same behaviour as outputs AI
same behaviour as outputs AR
active for external power failure
door opener
active as long as the emergency alarm progresses
active as long as the buttons are pressed
active for telephone line absence
active for low battery
RELAY
INTERMITTENCE
(INST)
steady-state
intermittent (500 ms ON / 500 ms OFF)
LISTEN TO THE
BATTERY LEVEL
(INST)
(expressed in mV)
LISTEN TO THE
EXTERNAL
POWER SUPPLY
LEVEL (INST)
(expressed in mV)
TEST OF ALARMS
(INST)
emergency-call button
battery alarm
periodic automatic test call
built-in speaker unit diagnostic alarm
no external power supply alarm
auxiliary alarm
To Next Page
Loading...
