8
Two-hole punching
Caution! To prevent damage to the punching mechanism, do not
punch more than 25 sheets of 80-gramm paper or two lms of 0.2 mm
at the same time. Also, empty the cuttings tray regularly.
Caution! Risk of squeezing ngers. Take hold of the punching lever
with both hands in the middle of the grip plate.
• Set the paper stop to the paper format used.
• Insert the sheets into the front slot C.
• Pull the punching lever E all the way down.
• Push the lever up again and remove the punched sheets.
Maintenance and care
• To prevent damage to the punching mechanism, empty the cuttings tray J regularly.
• In case of defects: Do not attempt to repair the unit yourself. Contact the manufacturer for any
required repairs. Read guarantee declaration for further information.
• To clean the housing, wipe the outside with a damp cloth. Do not use any chemicals for
cleaning.
Specications
Operating method Manual
Paper size A4, US letter, A5
Punching dies 21 rectangular (US pitch), 2 round
Punching depth Adjustable in two steps (2.5 mm, 4.5 mm)
Punching capacity 25 sheets (80 g/m² paper) or 2 transparent 0.2-mm lms
Plastic comb size 6–51 mm (up to 500 sheets)
Net weight 13 kg
Dimensions (W x D x H) 450 mm x 550 mm x 170 mm
Subject to technical changes without prior notice.
Transporting the unit
• Carry the unit with both hands. To prevent damage, do not use the
punching lever as a carrying handle.
To Next Page
Loading...