7
Full Motion Wall Mount for 19–50" TVs
www.bestbuy.com/bestbuyessentials
Installation instructions
STEP 1- Determine whether your TV has a flat, irregular, or
obstructed back
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
2 If your TV has a table-top stand attached, remove the stand. See the
documentation that came with your TV for instructions.
3 Lay the TV brackets, oriented vertically, on the back of your TV.
4 Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5 Identify which type of back your TV has:
• Flat back: The brackets lay flush against the back of your TV and do not block any
jacks. You do not need spacers when assembling the wall mount.
• Obstructed back: The brackets block one or more of the jacks on the back of your
TV. You need spacers when assembling the wall mount.
• Irregularly-shaped back: There is a gap between a bracket and some part of the
back of your TV. You need spacers when assembling the wall mount.
6 Remove the TV brackets.
To Next Page
Loading...
Need help?
General