Essilor Instruments Vision-C 600 User Manual

If a problem is detected, refer to the table below in order to take the appropriate measures.
Problem Estimated cause Recommended solution
Product doesn't turn On. Power cable not plugged in. Plug shall be into power outlet.
Wrong SD card mounting Screen remains black at start-up
Open the produt and open the cover
to access the main board.
In the SD card location, remove it
and put it back so that the card
touches the pins.
Restart the product and, in the case
that it starts replace all the covers
back on.
If the product does not turn on
contact your local technical support.
If the problem has not been resolved after taking the measures listed above, contact your local distributor
immediately.
Please refer to the name plate and let us have the following information:
Name of the instrument: VISION-C 600
Serial number: 9 digit-characters indicated on the name plate
Detailed defects
Your dealer has been trained by Essilor.
USER MANUAL > TROUBLESHOOTING
Vision-C 600 - Polarized visual chart system > V1- 02-2021 (VRSQSE) 36

Essilor Instruments Vision-C 600 Specifications

General

Brand	Essilor Instruments
Model	Vision-C 600
Category	Medical Equipment
Language	English