Essilor Instruments Vision-C 600 User Manual

1
2
3
2. [Ethernet]
Only when the [Ethernet] is selected.
> It is the name of the screen (it can take 12 characters).
3. [Configuration injection]
The settings are sent to the chart screen.
4. [Send image to Vision-C 600]
An image is sent to the chart screen in order to test the connection.
Once the adjustments are made, press on:
to confirm.
to cancel.
b. Adjusting optotypes from console
By IR
It is possible to generate optotypes from console by pressing on > of the keyboard of the
console.
Then, click on .
Set the mirror mode [OFF] or [ON] regarding your configuration.
The following page appears.>
USER MANUAL > ADJUSTMENTS BEFORE THE EXAMINATION
21 Vision-C 600 - Polarized visual chart system > V1- 02-2021 (VRSQSE)

Essilor Instruments Vision-C 600 Specifications

General

Brand	Essilor Instruments
Model	Vision-C 600
Category	Medical Equipment
Language	English