ESTA dust extractors have been manufactured according to the state of the art
and in compliance with safety regulations.
When used as intended, the devices are suitable for removing dry, non-
flammable, non-explosive, nontoxic dusts.
The dust extractor must not be used outdoors or under wet conditions.
The devices are suitable for commercial use, such as in industrial enterprises and
workshops.
Other applications are considered unintended use. ESTA is not liable for damages
due to unintended use!
ESTA sets up the dust extractor according to the operator’s information.
When connecting the suction hose, make sure to use only electrically conductive
hoses and that the electrical connection between the hose and the port is perfect.
If a so-called “spiral hose” is used, the metal spirals must be stripped and pressed
to the bare wall of the exhaust port with a pipe clamp after the hose is attached.
Only plugs and connectors complying with EN 61241-14 must be used for
connecting electrically driven industrial vacuums and dust extractors.
Extension cords, coupling plugs and connectors or adapters are not
permitted.
To Next Page
Loading...