EasyManua.ls Logo

Estes INTERCEPTOR 1250 User Manual

Estes INTERCEPTOR 1250
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
1250
KEEP FOR FUTURE REFERENCE • GUÁRDALAS PARA FUTURA REFERENCIA • À CONSERVER POUR RÉFÉRENCE ULTÉRIEURE
IMPORTANT: Please record date found on decal and keep for future reference. ______________
IMPORTANTE: Favor de escribir la fecha que aparece en la calcomanía y guardarla para futura referencia. _____________
IMPORTANT: Prendre note de la date indiquée sur la décalcomanie et conserver pour toute référence ultérieure. ______________
SUPPLIES / MATERIALES / FOURNITURES
MODEL ROCKET INSTRUCTIONS / INSTRUCCIONES PARA EL MODELO DE COHETE / INSTRUCTIONS POUR LES FUSÉES MINIATURES
Read all instructions. Make sure you have all parts and supplies. Test fit all parts before applying glue. Sand as necessary for precision assembly. Product color and shape may vary. / Leer todas
las instrucciones. Asegurarse de tener todas las partes y los materiales. Probar el ajuste de las piezas antes de poner el pagamento. Lijar lo que sea necesario para obtener un ensamblaje preciso.
El color y la forma pueden variar. / Lire toutes les instructions. S’assurer de posséder toutes les pièces et accessoires. Vérifier si les pièces s’assemblent bien avant de mettre de la colle. Poncer
autant que nécessaire pour assurer un assemblage précis. La couleur et la forme du produit peuvent varier.
INTERCEPTOR
®
037049 / 037050
Waterslide decal (not shown) /
Calcomanía para sumergir en
agua (no ilustrada) /
Décalcomanie par glissement à
l’eau (non représentée)
T 038370
Shock cord /
Cuerda de Tensión / Sandow
V 084445
Shock cord mount / Soporte de la
cuerda de tensión / Fixation du sandow
Q 062165
Antenna /
Antena /
Antenne
R 062160
Tail cone / Cono de la cola /
Cône de queue
N 062162
Pod left bottom /
Cápsula parte inferior
izquierda / Nacelle
Gauche Bas
P 062164
Pod right bottom /
Cápsula parte
inferior derecha /
Nacelle droit en bas
M 062161
Pod left top /
Cápsula parte superior
izquierda /
Nacelle gauche en haut
O 062163
Pod right top /
Cápsula parte
superior derecha /
Nacelle droit haut
I / H 062071
Laser cut wood sheet /
Hoja de madera cortada
con láser / Planchette en
bois coupée au laser
G / J / F 062072
Laser cut wood sheet / Hoja de madera cortada
con láser / Planchette en bois coupée au laser
L 038175
Launch lug /
Agarraderas de Lanzamiento
/
Cosse de lancement
C 030224
Engine block /
Bloqueador del motor /
Butée du moteur
U 035802
Parachute / Paracaídas / Parachute
K 030382
Body tube /
Tubo del cuerpo /
Tube du corps
E 030125
Laser cut card stock /
Cartulina cortada con láser /
Papier cartonné coupé au laser
PRIMER (WHITE) /
BASE DE PINTURA (BLANCA)
/ APPRÊT (BLANC)
SANDING BLOCK / BLOQUE
PARA LIJAR / BLOC DE
PONÇAGE
PAINT (WHITE, BLACK, FLUORESCENT ORANGE) /
PINTURA (BLANCA, NEGRA, ANARANJADA
FLORECIENTE)
PEINTURE (BLANC, NOIR, ORANGE FLUORESCENT)
CLEAR COAT (OPTIONAL)/
CAPA DE PINTURA TRANSPARENTE
(OPCIONAL)/ COUCHE DE PEINTURE
INCOLORE (OPTIONNEL)
PENCIL /
LÁPIZ /
CRAYON
RULER /
REGLA /
RÈGLE
HOBBY KNIFE /
NAVAJA DE PRECISIÓN /
COUTEAU DE BRICOLAGE
FINE SANDPAPER /
LIJA FINA /
PAPIER ABRASIF FIN
SCISSORS /
TIJERAS /
CISEAUX
CARPENTER’S GLUE /
PEGAMENTO DE CARPINTERO /
COLLE À BOIS
MASKING TAPE /
CINTA ADHESIVA
PROTECTORA /
RUBAN-CACHE
PLASTIC CEMENT /
CEMENTO PLÁSTICO /
COLLE À MATIÈRE PLASTIQUE
WAX PAPER /
PAPEL
ENCERADO /
PAPIER CIRÉ
D 030168
Mylar engine hook retainer
ring / Rondana de retención
Mylar del
gancho del motor /
Bague de retenue
Mylar du
crochet de moteur
S 062074
Nose cone /
Cono de la nariz /
Nez conique
B 035021
Engine hook /
Gancho del motor /
Crochet de moteur
A 030408
Engine mount tube /
Tubo del soporte del motor /
Tube du bâti moteur
H
I
F
G
J
G
Question and Answer IconNeed help?

Do you have a question about the Estes INTERCEPTOR 1250 and is the answer not in the manual?

Estes INTERCEPTOR 1250 Specifications

General IconGeneral
BrandEstes
ModelINTERCEPTOR 1250
CategoryToy
LanguageEnglish

Summary

Supplies and Materials

Tube Marking Guide

Assemble Engine Mount

Assemble Wing

Assemble Upper Fins

Prepare Sub Fins

Mark Tube

Install Engine Mount

Attach Fins and Wings

Attach Launch Lugs

Attach Wing Pods, Fin Antennas, and Tail Cone

Rocket Finishing

Install Shock Cord

Prepare Recovery System

Prepare Flight Recovery

Prepare Engine

Launch Controller Operation

Extend Controller Wire

Extend the launch controller wire before launching.

Precautions and Checks

Pre-Launch Check

Inspect rocket body, nose cone, fins, engine mount, and recovery system for damage before launch.

Flying Your Rocket

Choose a large, clear field, launch with minimal wind and good visibility, following safety codes.

Misfires

Procedure for handling misfires, including safety wait times and engine checks.

Related product manuals