Estun E300 - User Manual

No. OM-352-2-0005
E-Serials Device
E300 Operation Manual

Read and follow these instructions and all
safety blocks carefully.
 Have only trained and qualified persons install,
operate, or service this unit.
 Give this manual to the operator.
 For help, call your distributor.

Summary

Chapter 1 Outline

1.2 Features

Lists the key features and capabilities of the E300 device for bending operations.

1.3 Appearance: Ports

1.4 Electrical Specifications: Power and I;O

1.4 Electrical Specifications: Communication and Environment

Chapter 2 Programming

2.1 Page Structure: Overview

2.2 Operation Flow

2.3 Single-Step Programming

Introduces Single-Step programming for quick bending tasks.

2.3 Single-Step Programming: Parameters

Details parameters for Single-Step programming: Die, Material, Thickness, Hold Time, Retr.DLY.

2.3 Single-Step Programming: Example

2.4 Multi-Step Programming

Introduces Multi-Step programming for complex bending operations.

2.4 Multi-Step Programming: Parameters

Details parameters for Multi-Step programming: Die, Thickness, Material, Stock.

2.4 Multi-Step Programming: More Parameters

Continues parameter details for Multi-Step: Retract, Hold Time, Angle, BN, X-axis, Y-axis.

2.4 Multi-Step Programming: Final Parameters & Example

2.5 Manual Movement

2.6 Die Settings

Details how to set die parameters necessary for programming bending processes.

2.7 Bend Correction

Explains the process of commissioning the machine for accurate bending results.

2.7 Bend Correction: Axis Correction

Details angle, Y-axis, and X-axis correction for axis position accuracy.

2.8 Program Management

Guides on creating, editing, and deleting product programs.

2.9 Teaching: Overview & TechIn Para

Introduces Teaching operation and accessing the TechIn Para page for calibration.

2.9 Teaching: Axis Calibration

Chapter 3 Basic Operation

3.1 Start Machine

Instructions on how to start the machine after program setup.

3.2 Stop Machine: How to Stop

Covers methods for stopping the machine, including normal and emergency stops.

3.3 Alarm and Reset: Alarm Information

3.3 Alarm and Reset: Resetting Alarms

3.4 Monitor: Status Views

3.4 Monitor: Alarm History

3.5 Constant Parameters

3.5 Constant Parameters: Details

Appendix C Timing Charts

Timing Chart A

Timing Chart B

Appendix D Alarm List

Alarm List: General Alarms

Lists common alarms, their causes, and solutions for troubleshooting.

Alarm List: Communication & Servo Alarms

Lists alarms related to communication errors and servo drive issues.

Alarm List: Servo Drive Errors

Lists specific servo drive error codes and their troubleshooting guidance.

Estun E300 Specifications

General

Model	E300
Control Mode	Position, Speed, Torque
Communication Interface	RS485, CANopen
Power Supply	Single-phase/Three-phase
Input Voltage	220V AC
Frequency Range	50Hz/60Hz
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 60°C
Altitude	1000m max
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature