EN - 62
EN
2. Remove dirt container G6 from the mop unit.
3. Remove mop G9 from the mop unit. Drain excessive water from the tank. Rinse the tank
with water. Rinse mop G9 in owing water.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by a professional service! Failure to comply with
the instructions of the manufacturer will lead to expiration of the right to guarantee
repair!
8. PROBLEMS SOLUTIONS
Problem Solution
The device cannot be
switched on
Low battery. Place the device in the charging dock and
recharge.
Ambient temperature lower than 0 °C or higher than 40 °C.
Working temperature of the device is 0-40 °C.
To Next Page
Loading...
