ETC ColorSource Linear - Page 10

ETC Installation Guide
ColorSource Linear v1.7
Linear 2 in CellMode
DMX
Channel
5ch
(5 Channel
dir
(Direct)
1ch
(1 Channel)
rgb
(RGB)
1
Cell 1
Intensity
Cell 1
Intensity Cell 1 Intensity
Cell 1
Red
2 Red Red Cell 2 Intensity Green
3 Green Green Blue
4 Blue Blue/Indigo*
Cell 2
Red
5 Strobe** Lime Green
6
Cell 2
Intensity Strobe** Blue
7 Red
Cell 2
Intensity
8 Green Red
9 Blue Green
10 Strobe** Blue/Indigo*
11 Lime
12 Strobe**
*Original ColorSource Linear fixture uses blue in channel 4; Deep Blue fixture uses indigo in
channel 4.
**Use DMX values of 0 or 255 for no strobe. Use values of 1–254 to increase the strobe rate
from 1 per second up to 33 per second.
ColorSource Linear Page 10 of 20 ETC