ETC ColorSource Linear - Page 11

ETC Installation Guide
ColorSource Linear v1.7
Linear 4 in CellMode
DMX
Channel
5ch
(5 Channel
dir
(Direct)
1ch
(1 Channel)
rgb
(RGB)
1
Cell 1
Intensity
Cell 1
Intensity Cell 1 Intensity
Cell 1
Red
2 Red Red Cell 2 Intensity Green
3 Green Green Cell 3 Intensity Blue
4 Blue Blue/Indigo* Cell 4 Intensity
Cell 2
Red
5 Strobe** Lime Green
6
Cell 2
Intensity Strobe** Blue
7 Red
Cell 2
Intensity
Cell 3
Red
8 Green Red Green
9 Blue Green Blue
10 Strobe** Blue/Indigo*
Cell 4
Red
11
Cell 3
Intensity Lime Green
12 Red Strobe** Blue
13 Green
Cell 3
Intensity
14 Blue Red
15 Strobe** Green
16
Cell 4
Intensity Blue/Indigo*
17 Red Lime
18 Green Strobe**
19 Blue
Cell 4
Intensity
20 Strobe** Red
21 Green
22 Blue/Indigo*
23 Lime
24 Strobe**
*Original ColorSource Linear fixture uses blue in channel 4; Deep Blue fixture uses indigo in
channel 4.
**Use DMX values of 0 or 255 for no strobe. Use values of 1–254 to increase the strobe rate
from 1 per second up to 33 per second.
ColorSource Linear Page 11 of 20 ETC