Please don’t keep or store the tester in the spot with
high-temperature and moisture, or condensation, and under
direct daylight radiation for a long time.
If the instrument is damp, please dry it before keeping.
For replacing battery, please confirm testing wire has
moved apart the meter, and FUNCTION rotary switch is in
“OFF” position.
Please put the used batteries in appointed collection
place.
The Tester has no auto shut-off function. Please set
FUNCTION rotary switch to “OFF” after usage.
When the meter displays battery low voltage symbol ，
and you need to replace the battery in time.
If the Tester is not going to be used for a long period,
remove the battery.
Pay attention to measuring range and usage environment
stipulated for the Tester.
This measuring device is only to be used, disassembled,
adjusted and repaired by qualified personnel with
authorization.
When it may cause hazard by continuous use for the
reason of the Tester itself, it shall immediately stop using it
and deposit it at once, leaving it for disposal by authorized
agency.
For risk of danger icon in manual , users must perform
safety operations strictly in compliance with the manual
content.
To Next Page
Loading...
