EasyManua.ls Logo

Etesia BPHP2 - 8• Accessories in Option

Etesia BPHP2
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
8• ACCESSORIES IN OPTION
Ensure you follow the mounting instructions supplied with each option.
REMARK: if you do not have the skills or equipment necessary to
install your options yourself, please contact your dealer.
MU100D: MULCHING KIT (BPHP2, BPHPX2, BVHP,
BVHPX models)
MU124P: MULCHING KIT (HVHP, HVHPX models)
• Mulching allows you to mow without collecting grass, leaving the
cut grass on the ground instead (picture 40).
MDD100
Mowing with a deector (picture 41)
The deector must be tted if you wish to work without the grass
collection system, otherwise the cutting system cannot be started.
A rst pass at reduced speed and at maximum cutting height will
clear the area to be mowed. For a nice nish, do a second pass at the
nal cutting height.
The MDD100 deector allows the grass to be evenly spread across
the width of the machine.
MRD100 : TOWBAR
There must be a tow ball tted to the towbar (picture 42). Buy a ball
through your retailer.
• Do not use the mower on slopes terrain with a trailer.
• Maximum authorised mass: 450 kg (trailer + contents).
• Maximum authorised towbar load: 50 kg.
• Maximum tractive force: 100 kg.
CAUTION! Ensure that the force applied to the towbar
is always directed downwards. Pay attention when pulling
loads. Avoid making tight turns.
Assemble the locking pin (a) delivered with the tow bar.
M0102: SUSPENSION FOR DRIVER’S SEAT
• The comfort of the seat can be improved using this suspension. It can
be adjusted according to the driver’s weight.
MV103: SNOW PLOUGH
• This snow plough (picture 43), with a working width of 1,2 mtr, is
tted with a scraper strip.
MET: SPREADER
• This option allows spreading of salt, sand or fertilisers (picture 44).
MSD103: SUPPORT FOR FRONT ACCESSORIES
• This is an interface necessary for the mounting of the accessories
(picture 45).
MXBUF: ROAD APPROVAL KIT (picture 46)
MND100: CHAIN KIT
• Snow chain kit for the rear wheels.
MAC: ARMREST
ML103 : CONTROL LEVER
(picture 47)
MM103 : MOSS REMOVER (picture 48)
ML103H : FRONT ACCESSORIES PARALLE-
LOGRAM (picture 49)
MT103 : SWEEPER (picture 50)
MU103 : FRONT SWEEPER COLLECTINGBOX
MTS103 : FRONT SWEEPER SIDE BROOM

Related product manuals