ETH-messtechnik DRVL User Manual

tel. +49 (0)79 72 9310-0
hagstrasse 10 . D-74417 gschwend
sales@eth-messtechnik.de
Operator manual
English
messtechnik
DRVL
Option „F“
with base/foot

ETH-messtechnik DRVL Specifications

General

Brand	ETH-messtechnik
Model	DRVL
Category	Transducer
Language	English

Summary

Key Safety and Usage Instructions

Product Applicability and Usage Guidelines

Device Description and Operational Principles

Operational Principle Explained

Environmental and Location Conditions

Mechanical Installation Procedures

Critical Assembly Precautions

Highlights careful handling, avoiding overload, and proper grounding during assembly.

General Mechanical Assembly Guidelines

Installation Parts and Torque Values

Measurement Chain Configuration

Electrical Connection Guide

Wiring Best Practices for Signal Integrity

Details how to avoid interference and connect cables correctly.

Connector Pinout Details

Extension Cable Guidelines

Power Supply Requirements

Pin Assignment Reference

DRVL Standard Cable Pin Configuration

Details pin, color, and occupancy for the AK12.4 standard sensor cable.

DRVL Robot Cable Pin Configuration

Details pin, color, and occupancy for the AK12.5 robot sensor cable.

Signal and Measurement Outputs

DRVL Technical Datasheet

Electrical Specification Details

Details voltage, power, resolution, accuracy, and EMC compliance.

Mechanical Dimensions DRVL-F

DRVL Series Technical Parameters

Lists torque range, spring constant, mass moment, and load ratings for DRVL models.