24-Port Web-Smart Ethernet Switch
User’s Manual
16
and saved under “ Save Configuration “ by the new
name).
<Note> (Only “ a-z “, “A-Z”, “0-9”, “under line” & “Space”
can be acceptable, totally can not exceed 16 characters).
z Password: Enter a user-defined password and change
the factory default password.
<Note> (Only “ a-z “, “A-Z”, “0-9”, “under line” & “Space”
can be acceptable, totally can not exceed 16 characters).
z Apply: Click the Apply button and apply the new System
settings.
IP CONFIGURATION
z Refresh: Click the Refresh button and refresh back to
the last saved IP Configurations.
z IP Address, Netmask, Default Gateway: You can see
and change the IP Address, Netmask, and Default
Gateway of the Ethernet Switch.
z Apply: Click the Apply button and apply the new IP
Configurations.