How to get rid of the smell when using the ETNA EKP358RVS for the first time?
It's normal for a new ETNA hob to emit a slight smell during the first few uses as the appliance heats up. This smell will disappear after it has been used a few times. Ensure that you ventilate the kitchen during this period.
What to do if my ETNA EKP358RVS is not working?
If your ETNA hob isn't working, the first thing to check is the fuse box. A defective cable or faulty connection might be disrupting the power supply. Check the fuses to ensure they are working correctly.
Why does a fuse blow as soon as the ETNA Hob is switched on?
If a fuse blows as soon as you switch on your ETNA hob, it might be wrongly connected. Check the electrical connections to ensure they are properly configured.
Why can I hear a ticking sound in my ETNA EKP358RVS Hob?
If you hear a ticking sound in your ETNA hob, it's likely due to the capacity limiter on the front and back zones. This ticking can also occur at lower settings and is considered normal operation.
General| Type | Gas Hob |
|---|---|
| Width | 58 cm |
| Number of Burners/Cooking Zones | 4 |
| Material | Stainless Steel |
| Cut-out Dimensions (W x D) | 560 x 480 mm |
| Ignition Type | Electric ignition |
| Gas Type | Natural gas |
| Safety Features | Flame Failure Device |
To Next Page
