How to fix 'u' displayed when switching on ETNA KIF577ZT Hob cooking zone?
When the display shows ‘u’ after switching on a cooking zone of your ETNA hob, it means you need to use a suitable pan.
What to do if my ETNA KIF577ZT Hob is not working and nothing appears on the display?
If your ETNA hob isn't working and the display is blank, the issue could be a lack of power. This might be due to a defective cable or a faulty connection. Inspect the fuses or the electric switch to ensure they are functioning correctly.
Why does error code E3 or E4 appear on my ETNA KIF577ZT?
Error codes E3 or E4 indicate that the internal temperature of your ETNA hob is too high. Turn off the hob and allow it to cool down until the 'H' disappears from the display. Then, switch it back on. If the error persists, contact an authorised service agent.
Why does error code E5 or E6 appear on my ETNA KIF577ZT?
Error codes E5 or E6 indicate that the internal temperature of your ETNA hob is too high. Ensure the hob has enough ventilation and is correctly installed. Allow the hob to cool down completely before attempting to restart it. Verify that the fan is running smoothly; if not, contact a service technician for assistance.
What to do if a fuse blows as soon as I switch on the ETNA KIF577ZT?
If a fuse blows immediately upon switching on your ETNA hob, it suggests the hob has been incorrectly connected. You should check the electrical connections to ensure they are properly configured.
What does it mean when bridge zone link symbols appear on the ETNA Hob display and the slider isn't working?
If bridge zone link symbols are displayed and the slider isn't working on your ETNA hob, it indicates that the bridge zone link function is activated. To resolve this, you need to deactivate the bridge zone link function.
General| Number of cooking zones/burners | 4 |
|---|---|
| Type | Gas |
| Width | 580 mm |
| Gas type | Natural gas |
| Dimensions (WxDxH) | 580 x 510 x 90 mm |
To Next Page
