What to do if my ETNA Hob is not working and nothing appears on the display?
If the ETNA hob is not working and the display is blank, it's likely due to a power supply issue. Check the fuses or the electric switch to ensure a proper connection.
What to do if my ETNA Hob shows error code E5/E6?
If the ETNA hob displays error code E5/E6, it indicates that the internal temperature is too high, there's an error on the fan (left or right), or the air exhaust is blocked. Ensure the fan air exhaust is clear. If the error persists, contact an authorised service agent.
What to do if my ETNA KIS260ZT shows error code E3/E4?
If the ETNA hob displays error code E3/E4, it means the internal temperature of the hob is too high. Turn off the hob and allow it to cool down until 'H' disappears from the display. Turn the hob back on. If the error reappears, contact an authorised service agent.
What to do if my ETNA KIS260ZT shows error code E1/E2?
If the ETNA hob displays error code E1 or E2, the supply voltage or frequency is different from the rated values. Turn off the hob and let it cool down until 'H' disappears from the displays. Turn the hob back on. If the error is still displayed, contact an authorised service agent.
How to deactivate 'Lo' symbol on my ETNA KIS260ZT?
The 'Lo' symbol on the timer display of your ETNA hob indicates that the key lock function is activated. To deactivate it, switch on the hob, then touch and hold the lock key.
What to do if a fuse blows when I switch on my ETNA KIS260ZT Hob?
If a fuse blows as soon as the ETNA hob is switched on, it suggests the hob has been incorrectly connected. Have the electrical connection checked by a professional.
How to fix 'u' display and link function on my ETNA KIS260ZT Hob?
To resolve the 'u' display and ensure the link function (bridge cooking zones) works on your ETNA hob, use a pan suitable for induction cooking with a diameter of at least 12 cm. Ensure bridge cooking zones are fully covered by the pans.
General| Type | Induction |
|---|---|
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Material | Ceramic glass |
| Dimensions (WxDxH) | 590 x 520 x 60 mm |
To Next Page
