EasyManua.ls Logo

ETNA KIS560ZT - User Manual

ETNA KIS560ZT
84 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GEBRUIKSAANWIJZING
INSTRUCTIONS FOR USE
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
INDUCTIEKOOKPLAAT
INDUCTION HOB
TABLE DE CUISSON À INDUCTION
INDUKTIONSKOCHFELD
KIS560ZT
KIS577ZT

Table of Contents

Questions and Answers

  • A
    Abigail MclaughlinAug 7, 2025
    What to do if my ETNA KIS560ZT Hob is not working and nothing appears on the display?
    • Y
      yvonnemcdonaldAug 7, 2025
      If your ETNA Hob isn't working and the display is blank, it's likely due to a power supply issue. Check the fuses or the electric switch if there's no plug to ensure the hob is receiving power. A defective cable or faulty connection could be the cause.
  • C
    Christopher PatelAug 11, 2025
    Why does my ETNA KIS560ZT fuse blow as soon as I switch it on?
    • C
      cynthia75Aug 11, 2025
      If a fuse blows immediately when you switch on your ETNA Hob, it indicates that the hob has been wrongly connected. You should check the electrical connections to ensure they are correct.
  • R
    rlyonsAug 15, 2025
    What to do if my ETNA KIS560ZT shows error code E3 or E4?
    • R
      Robert ThompsonAug 15, 2025
      If your ETNA Hob displays error code E3 or E4, it signifies that the internal temperature of the hob is too high. To resolve this, switch off the hob and allow it to cool down until the 'H' disappears from the display. Then, switch the hob back on. If the same error reappears, it is recommended to call an authorised service agent.
  • J
    Jordan PatelAug 19, 2025
    What does it mean if my ETNA Hob shows error code E5 or E6?
    • L
      Lacey BrownAug 19, 2025
      If your ETNA Hob shows error code E5 or E6, it means the internal temperature of the hob is too high. Ensure the hob has sufficient ventilation and is correctly installed. Let the hob cool down before attempting to restart it. Check if the fan is running smoothly; if not, contact a service technician.
  • D
    David RamirezAug 23, 2025
    Why does my ETNA KIS560ZT Hob cooking zone suddenly stop working and I hear a signal?
    • R
      Randy WarnerAug 23, 2025
      If a cooking zone on your ETNA Hob suddenly stops working and you hear a signal, it means the preset time has ended. To stop the beeping, touch the + key of the timer.
  • D
    Dr. Cassandra McclureAug 28, 2025
    What does error code E1 or E2 mean on my ETNA KIS560ZT?
    • D
      Diana SmithAug 28, 2025
      Error code E1 or E2 on your ETNA Hob indicates that the supply voltage or frequency is different from the rated values. It is recommended to contact a certified installer to resolve this issue.
  • N
    ndeanSep 1, 2025
    Why does my ETNA Hob display ‘u’ after switching on a cooking zone?
    • B
      Brett PetersSep 1, 2025
      When your ETNA Hob displays 'u' after switching on a cooking zone, it indicates that you need to use a suitable pan.

ETNA KIS560ZT Specifications

General IconGeneral
Width59 cm
Number of Cooking Zones4
Control TypeTouch Control
Total Power7.2 kW
MaterialCeramic Glass
Residual Heat IndicatorYes
TypeInduction
Safety FeaturesChild Lock

Related product manuals