How to get rid of the smell when using the ETNA KCV154WIT Hob for the first time?
A slight smell from your ETNA Hob during the first few uses is normal because the new appliance is heating up. This smell will disappear after it has been used a few times. Make sure to ventilate the kitchen.
What to do if my ETNA KCV154WIT is not working?
If your ETNA Hob is not working, it's likely due to a power supply issue, possibly a defective cable or a faulty connection. You should check the fuses or the electric switch if there is no plug.
Why does a fuse blow as soon as the ETNA Hob is switched on?
If a fuse blows as soon as your ETNA Hob is switched on, it indicates that the hob has been wrongly connected. You should check the electrical connections to resolve this issue.
Why do the pans make a noise while cooking on the ETNA Hob?
The noise your pans make while cooking on the ETNA Hob is due to the energy flowing from the hob to the saucepan. At high settings, this is normal for some pans and will not damage the pans or the hob.
To Next Page
General
