EN 7
USE
Initial use
Prepare for use
• Remove all accessories from inside the oven and clean them
thoroughly with warm soapy water. Close the door and switch the
empty oven to maximum temperature for approximately 30 minutes.
After this, switch on the grill for 15 minutes. Allow the oven to cool
down before cleaning it with warm water.
Setting the current time
When the oven is connected to mains power ‘0:00’ will appear in
the display.
1. Press the clock button.
The hour display will flash.
2. Use the selection dial to enter the correct hour.
3. Press the clock button again.
The minute indicator will flash.
4. Use the selection dial to enter the correct minute.
5. Press the clock button again to confirm the set time.
The time can be adjusted by press and hold the clock button until
the ‘hours’ indicator starts to flash. Set the clock as described
above.
No aluminium on the oven floor
• Never cover the base of the oven with aluminium foil and also never
place baking trays or tins on the base of the oven. Foil actually
blocks the heat, damaging the enamel and negatively influencing
the cooking result.
Clean immediately
• Spilled food containing sugar or fruit juices, such as prune juice or
rhubarb, can damage the colour of the enamel. We recommend you
clean such spillages immediately.
To Next Page
Loading...
