13
Exit the menu using the mode button.
Gravity sensor: When the gravity sensor is switched on, a camera in Parking mode will
automatically record a 20 second video in the event of an impact (this recording
is not automatically deleted). Three levels may be set for the severity of the
impact.
Switch o – 2G (light impact) – 4G – 8G (serious impact)
Settings in the photo menu (symbol shows a photo camera in the top left of the display):
Resolution: Select the resolution for your photos:
12M – 10M – 8M – 5M – 3M – 2M HD – 1,3M – VGA
Place: The camera takes three pictures, one after the other, and combines them in one
image.
Switch o – open (switched on)
Image quality: Select the image quality for your photos:
High quality – Standard – Low (Low quality)
Sharpness: Select the sharpness setting for your photos:
Strong – Standard – Soft
White contrast: Set the white contrast for your photos in order to get images that are true to
colour.
Automatic –Sunlight – Cloudy day – Wolfram (bulb light) – Fluorescent
(light from a tube)
ISO: Set the sensitivity of the camera.
Automatic – 100 – 200
Lighting compensation: Here you can set the brightness of the photos.
+2.0 …+0.0 … -2.0
Anti-Shake: Switch the image stabiliser on/o.
Switch o – open (switched on)
Short overview: Select the preview time for the pictures that have been taken.
Switch o – 2 seconds – 3 seconds
Date stamp: The date is shown on the photo.
Switch o – Date – Date/Time
Exit the menu using the mode button.
In Standby mode: Briey press twice opens the menu for the camera settings. With the cursor
buttons (Positions 11 and 13 in the overview), you can select the various menu
items. Press the OK button to open the selected menu item. Use the cursor buttons
to select the setting in the menu item, and conrm by pressing the OK button.
To Next Page
Loading...