18
English
POWERING THE DOORBELLWITH EXISTING DOORBELL WIRES
APPENDIX 3
12
3.1 Verify whether the doorbell wires are working
1. Ring the existing doorbell to check if it is working. If the doorbell doesn’t
ring, your doorbell wires may be defective. Power the doorbell on its own
battery or consult an electrician to x the wires.
2. Shut off power at the breaker. Turn the lights on / off in your home to make
sure the electricity in your house is properly shut off.
OFF
Always be careful when handling wires. If you’re not comfortable
installing it yourself, have a qualied electrician do it.
To Next Page
Loading...
