05 English English 06
STEP 1 POWERING ON THE WI-FI
DOORBELL CHIME
Connect the HomeBase 2 to the Internet
1. Fix the power connector to Wi-Fi Doorbell Chime.
①
Place the power connector over Wi-Fi Doorbell Chime in the direction the
arrows indicate.
②
Align the raised slots of the power connector with the notch on the base of
the doorbell chime.
③
Rotate clockwise to lock the power connector in place.
1
2 3
2. Extend Wi-Fi Doorbell Chime’s antennas.
3. Plug Wi-Fi Doorbell Chime into an AC power supply at your desired location.
The LED indicator turns solid green when the doorbell chime is ready for setup.
To Next Page
Loading...
