What to do if my EUFY RoboVac X8 Hybrid Vacuum Cleaner won't charge?
If your EUFY Vacuum Cleaner isn't charging, check if the LED indicator on the Charging Base lights up when the RoboVac is not on it. If it doesn't, reconnect the adapter with the Charging Base and try a new power outlet. Also, dust off the charging contact pins.
What to do if my EUFY Vacuum Cleaner stops working?
If your EUFY Vacuum Cleaner suddenly stops working, check if it's trapped or stuck on an obstacle, or if the battery level is too low. Also, check for any voice prompts or LED indicators. If problems persist, turn off the RoboVac, wait 3 seconds, and turn it back on.
Why does my EUFY RoboVac X8 Hybrid have weak suction power?
If your EUFY Vacuum Cleaner's suction power is weak, check the following: * Ensure that the suction inlet isn't blocked. * Empty the dust collector. * Clean the filter with water and ensure it's not wet from water or other liquids on the floor. * Select the max suction power level in the EufyHome app.
Why is my EUFY RoboVac X8 Hybrid making a loud noise?
If your EUFY Vacuum Cleaner suddenly produces a loud noise, try adjusting the suction power level in the EufyHome app. Also, check if the rolling brush, filter, dust collector, suction inlet, or wheels are stuck. Make sure the filter and the brush guard have been properly installed.
Why does my EUFY Vacuum Cleaner lose the map?
If the map of your EUFY Vacuum Cleaner is lost or rebuilt even after a floor plan is created, it may be because the position of the RoboVac or Charging Base was adjusted, or the surroundings were changed. In this case, the RoboVac will try to reposition and remap to match the surroundings. Try placing the RoboVac back on the Charging Base and starting a new cleaning session.
Why is my EUFY Vacuum Cleaner not turning on?
If your EUFY Vacuum Cleaner cannot be activated, make sure it is connected to a power source and that the battery is fully charged. Press and hold the button for 3 seconds to turn on the RoboVac.
Why is my EUFY RoboVac X8 Hybrid not connecting to Wi-Fi?
If your EUFY Vacuum Cleaner cannot connect to a Wi-Fi network, make sure your Wi-Fi router supports the 2.4GHz and 802.11 b / g / n bands; the 5GHz band is not supported.
What to do if EUFY RoboVac X8 Hybrid cannot return to the Charging Base?
If your EUFY Vacuum Cleaner cannot return to the Charging Base, remove any objects within 3 ft / 1 m to the left and right side and within 6 ft / 2 m of the front of the Charging Base. Check if the RoboVac is stuck by any objects. Ensure that the RoboVac started cleaning from the Charging Base and was not moved during cleaning. Clean the charging contact pins.
Why can't I schedule cleanings on my EUFY Vacuum Cleaner?
If you cannot schedule cleanings on your EUFY Vacuum Cleaner, make sure the RoboVac is turned on. You can set the time of day and scheduled cleaning time via the EufyHome app. Ensure the scheduled time has been set correctly and that the RoboVac’s power is sufficient to start cleaning. Also, the RoboVac will not start a scheduled cleaning while already performing a cleaning task.
Why can't I control my EUFY RoboVac X8 Hybrid Vacuum Cleaner with Google Assistant?
If you cannot control your EUFY Vacuum Cleaner with the Google Assistant, check for internet connection problems. Also, verify that you've installed the Google Home app on your smart device and initiated the 'EufyHome' action within the app. Make sure you're using the correct commands when speaking to the Google Assistant and try repeating your question clearly.
Details the top and side components of the RoboVac.
Details the bottom components of the RoboVac.
Illustrates the charging base components.
Explains the function of various buttons and status lights.
Explains how RoboVac navigates and maps.
Describes how the robot creates and updates home maps.
Provides essential advice before operating the RoboVac.
Guides on removing foam blocks and positioning the base.
Explains how to charge the RoboVac and its base.
Instructions for turning the device on and off.
General| Suction Power | 2000 Pa |
|---|---|
| Battery Life | 180 minutes |
| Dustbin Capacity | 400 ml |
| Water Tank Capacity | 250 ml |
| Navigation | Laser Navigation |
| Charging Time | 5-6 hours |
| Noise Level | 60 dB |
| Compatible Floor Types | Hardwood, Tile, Carpet |
| Connectivity | Wi-Fi |
| Control | App, Voice Control |
| Features | Multi-floor Mapping |
| Dimensions | 345 x 345 x 97 mm |
To Next Page