3
4
Using Your RoboVac
2
If you cannot remove the objects surrounding the Charging Base, check whether RoboVac
can return without assistance; if not, contact eufy customer service for help.
- Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return.
- When the Charging Base is connected to AC power, the LED indicator on the Charging Base
is SOLID WHITE.
5
EufyHome
EufyHome
Download on the
App Store
Google Play
B
E
F
Fully charge RoboVac before use. The
LED indicator on RoboVac breathes
orange while charging, and is solid blue
when fully charged.
Download the EufyHome app and follow
the in-app instructions to complete the
Wi-Fi connection. You then will be able to
control RoboVac via this app. Refer to the
Owner's Manual for details.
Important Tips
When using for the first time, follow RoboVacto observe
and resolve any problems that may occur.
c
F
Remove power cords and small objects from the floor that may entangle RoboVac.
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid
cleaning very dark-colored high-pile rugs or rugs thicker than 1.02 in/26 mm as they
may cause RoboVac to malfunction.
The "No-Go" zones that you set may be ineffective in some cases. It is strongly
recommended to place boundary strips (sold separately) in front of fireplaces and
certain areas (i.e. air vents) that may cause damage to RoboVac if entered.
Keep RoboVac away from wet areas during cleaning.
RoboVac may climb on top of objects less than 0.67 in/ 17 mm in height. Remove
these objects if possible.
Anti-drop sensors will prevent RoboVac from tumbling downstairs and steep drops in
most cases. Sensors are less effective if dirty or used on carpeted/reflective/very
dark-colored floors. It is recommended to place physical barriers to block off areas
where RoboVac may fall.
To Next Page
Need help?
General
