TROUBLESHOOTING
13
The display shows an error
message (F1).
This may be due to setting low voltage. Check
Battery Monitor setting is on Low.
Compressor pressure
too high
Temperature of compressor
and/or electronics too high
DC: Check all connections. Increase
voltage of DC power source.
AC: Replace defective 110V AC
power adapter.
Contact After Sales Support to
arrange repair.
Disconnect power to fridge for 20
minutes. Then attempt restart.
Contact After Sales Support to
arrange repair.
Disconnect power to fridge for 20
minutes. Then attempt restart.
Contact After Sales Support to
arrange repair.
Re-start vehicle to increase battery voltage level.
The fridge has switched off due to an internal
fault. Contact After Sales Support.
TIPS AND SUGGESTIONS
F1 Low voltage to fridge
Faulty condensor fan
Faulty temperature sensor
Compressor not kicking in
F2
F3
F4
F5
F6
Connected to DC power source, the Fridge/
Freezer has switched off.
SolutionError Code Possible Cause
To Next Page
Loading...
