5. Drape the y over the tent. It’s reversible - use either
camo or tan. Orient the y so that the tent door and
the y door both open from the same end. Align the
rod across the center peak of the tent. See g 4B.
6. Reach under the rain y and secure it to each pole
with the attached Velcro
®
fasteners. See g 5B.
7. Attach each side
release buckle from the
y to their mates on the
staked out webs. Adjust
web tension as necessary.
See g 6B and 7B.
8
. On the right and left side hem of the y are guy
out loops. Tie the short guy out lines to these loops,
pull taut and stake them down. See g 8B
.
fig 4B
fig 5B
fig 8B
fig 7B fig 6B
The tent is now ready for use
Both tent and fly doors
open from here