Eureka fc9 Plus - Recautions; About the Scope of Use of the Product; Product Introduction

4 5
PRODUCT INTRODUCTION
PRODUCT OVERVIEW
HEPA Accessories
stand
Roller
brush
Cleaning
brush
Cleaning
shovel
Bolt and
souvenir coin
Cleaning
solution
Recharge
base
Release button of
roller brush cover
Roller brush
cover
Handle of dirty
water tank
Voice
switch button
Nozzel base
Handle
Mode
switch button
Display
screen
Clean water
tank
Dirty water
tank
Nozzel
Main switch button
Indicator light circle
Release button of
dirty water tank
Electrolytic
water switch
button
RECAUTIONS
This product is suitable for hard floor in indoor home environment, including
waxed floor, stone floor, rubber floor, marble floor, granite floor, terrazzo floor,
solid wood floor, composite floor, bamboo floor, as well as other flat floor surfac-
es with all kinds of mirror tiles, porcelain tiles, etc. If the product is used on uneven
floor surfaces, the best eect may not be achieved.
Do not use the product near or on the surface of flammable and explosive
objects, which may cause fire and explosion.
Do not use this product near the working fireplace or heater to prevent deforma-
tion of the machine enclosure.
Do not use this product to absorb high temperature substances (unextinguished
cigarette butts, matches, hot ashes, etc.), ultra-fine substances (lime, cement,
wood chips, gypsum powder, ashes, carbon powder, etc.), dangerous goods
(solvents, descaling agents, etc.), chemical substances (acids, cleaners, etc.) and
other substances with uncertain physical properties.
Do not use this floor washer to absorb detergent, kerosene, gasoline, alcohol,
paint, perfume, etc. These liquids may cause short circuit, fire or explosion to the
machine.
Do not use this floor washer to absorb toner used in laser printer and copier.
These objects may cause fire or explosion.
Do not touch the plug or any live part of the product with wet hands to avoid the
risk of electric shock.
Do not use the product if the plug is damaged. Please call our professional
maintenance personnel for replacement to avoid danger.
Please keep the airflow passage and moving part of this product away from long
hair, loose clothing, fingers and other parts of the body. Do not point the vacuum
tube, accessory suction head or tool to the eyes or ears, or put them into the
mouth.
Please use the cleaners produced by our company or our approved manufacturer.
Do not add other solutions to avoid the generation of toxic and harmful gases.
In the process of operation, if electric leakage or high temperature and abnormal
sound of motor is found, such as overheating of the machine body, abnormal
sound, odor, low suction, etc., please stop the machine immediately and call our
professional maintenance personnel.
After the machine is used, please clean the dirty water tank in time to prevent
odor, and keep the ventilation passage clear to avoid suction drop and motor
heat caused by blockage which will aect the service life of the floor washer.
Please keep the machine in a dry place after use. Otherwise, the insulation and
service life of the appliance will be aected if it is stored in a humid place.
The machine body and the floor brush of the floor washer are equipped with
power-up unit and cannot be soaked or rinsed with water.
Please check the suction nozzle regularly to make sure it is clear. If any blockage
is found, please remove it in time to avoid suction drop caused by the blockage
which will aect the performance of the machine.
When replacing the roller brush, please make sure that the machine has been
turned o.
In case of failure of the machine, do not repair it by yourself. Please our after-sales
department for help.
In the case of below situations do not use the appliance and send it immediately
to the nearest approved maintenance facility :
(1) The appliance fell and consequently damaged.
(2) The power cord is damaged.
Do not dismantale the closed machine by yourself. Customers cannot repair any
parts of the machine by themselves. And do not try to change the performance
of the machine, otherwise it will cause danger.
The use of voltage that does not conform to the specifications of this product will
damage the product and even cause injury to the user.
The correct rated voltage is indicated on the nameplate.
When cleaning stairs with this product, extreme caution should be exercised to
prevent falling.
Do not shake the machine up and down, or do not make the machine suer
violent collision, so as to prevent dirty water from flowing into the motor.
When the motor is working, do not lift or carry the machine, or do not put the
machine to one side or lay the machine flat , so as to prevent dirty water from
flowing into the motor.
The machine should be placed against the wall after use to prevent tripping
accident.
The machine can only be used when the clean and dirty water tanks are properly
installed.
Do not place any small objects in the air outlet of the machine, and do not block
the air outlet. Take away all small objects that may aect the smooth air flow of
the air outlet to prevent the machine from overheating.
Do not wet the machine body, otherwise the machine may be damaged by short
circuit and cause fire.
All the technical and other data reflected in this product manual are obtained by
our company or the designated third party testing company, and our company
reserves all the right for final interpretation.
●
●
●
●
●
●
●
●
●
●
●
●
●
ABOUT THE SCOPE OF USE OF
THE PRODUCT
Do not use this floor washer to absorb sharp or large objects, such as glass
fragments, small toys, pins, paper clips, little stones, gypsum, large pieces of
paper, etc. These objects may cause blockage and damage to the machine.
Do not use this floor washer to absorb burning or smoking objects, such as ashes
from unextinguished heat sources, burning cigarette butts or matches.
This product is not suitable for cleaning stains with strong grease, strong sticki-
ness or strong dyeing, such as shoe polish, paint and pigment.
●
●
●