Eureka Genesis - 40 Wide x 100 Single Pole Tent Specifications

w w w . e u r e k a t e n t s . c o m f a x : 6 0 7 . 7 7 9 . 2 2 9 1
R E V . G 5 . 0 7
genesis
100'
21'
19'4"
10'
7'
7'
107' 8.4" inside
126' 1.5" outside
Full Wind Kit Install:
Full Wind Kit Install:
Stake bars:
Stake bars:
Ratchet and stake plate
Ratchet and stake plate
assembly installed at all
assembly installed at all
locations.
locations.
Important: Wind Kit diagram
Important: Wind Kit diagram
is only a suggestion. Soil
is only a suggestion. Soil
conditions can vary from
conditions can vary from
site to site and within a
site to site and within a
specific setup site. Installer
specific setup site. Installer
must refer to the specific
must refer to the specific
tent design's blueprint for
tent design's blueprint for
stake load requirements in
stake load requirements in
order to satisfy full wind load
order to satisfy full wind load
requirements.
requirements.
40' Wide x 100' Single Pole
Normal Install:
Normal Install:
Can be installed with a
Can be installed with a
Standard 4" dia. x 21' center
Standard 4" dia. x 21' center
pole. ( Not wind rated )
pole. ( Not wind rated )
Stake bars at the lace lines,
Stake bars at the lace lines,
web belts and corners.
web belts and corners.
42” Nailhead stake with 5/8”
42” Nailhead stake with 5/8”
rope and carabiner at all
rope and carabiner at all
other locations.
other locations.