16
Function Instruction
Fixed-angle
swing mode
Switch between simple swing and fixed-angle swing to
satisfy user’s requirement.
Low-temperature
drying function
The unit runs the dry mode at a lower set temperature to
improve the drying capacity.
Setback function
After shutdown, the unit will automatically run to ensure that
the indoor ambient temperature is within the set temperature
range.
Independent
swing function
It can set the swing mode with 4 swing air outlets to satisfy
the users in different air outlet directions.
Panel lifting
function
The panel can come down to let the user to clean the filter.
4.7.1 Fresh Air Function Setting
Under on status, after entering into user function page, press “∧” or “∨” button to
select fresh air function and press “＜” or “＞” button to turn on or turn off air
function. Press “MENU/OK” button to enter into the setting page of fresh air mode.
After entering into the setting page of fresh air, press “∧” or “∨” button to adjust
the mode. There are 10 setting modes. Once setting is finished, press “MENU/OK”
button to save the setting.
To Next Page
Loading...
Need help?
General