Eurofred daitsu ACCD WC4 Series User Manual

36
decreases time by 0.5h. Press“ON/OFF” button to return to the previous page.
Please refer to the Fig. as below.
Figure 4-18 Countdown timer off
If timer function is turned on, the set hours will decrease as the unit operation
time increases. In this case, residual hours can be viewed after entering timer
setting page. This timer function will be executed for only once and then it will be
cancelled automatically.
Note：
If this timer function is turned on, when the unit is turned on or turned off, this
timer function will be cancelled automatically.
4.11 Clock Setting
4.11.1
Time Format Setting
The user can set the time format in 12-hour system or 24-hour system. Select
clock symbol in menu page and then press “MENU/OK” button to enter clock
setting page. Press “∧” or “∨” button to select time format and then press “＜” or

Eurofred daitsu ACCD WC4 Series Specifications

General

Brand	Eurofred
Model	daitsu ACCD WC4 Series
Category	Controller
Language	English