26
The following statuses can be viewed: if defrosting is operating; if auxiliary
heating is operating; residual time of filter cleaning reminder; indoor ambient
temperature; outdoor ambient temperature.
Note：
(1) The residual time of filter cleaning reminder is valid only when the cleaning
reminder function is turned on.
(2) If there isn’t outdoor ambient temperature sensor for the unit or the sensor
detection hasn’t started to work, the outdoor ambient temperature view
parameter is invalid.
4.9 Current Error View
When error occurs in the unit, error symbol will be displayed on the main page of
wired controller. In this case, you can enter error view page to view the current
error.
Press “MENU/OK” button to enter the menu and select the function symbol to be
viewed. Then press “MENU/OK” button to enter view function page. Press “∧” or
“∨” button to select error information. Press“MENU/OK” button to enter error
information page. When there are many errors, press “∧” or “∨” to turn pages.
Press “ON/OFF” button to return to the previous page. Please see the Fig. as
below.
To Next Page
Loading...
Need help?
General