www.eurolite.de
3
OPERATING DETERMINATIONS
The QuickDMX transmitter/receiver serves for wireless transmission of
DMX512 signals in lighting installations. With all the technology being packed
into a USB plug, the unit is extremely compact and user-friendly. The unit is
designed as transceiver, i.e. it can be used as transmitter and receiver as
desired. This unit eliminates extensive cabling between the DMX controller
and the DMX-controlled units.
The GFSK (Gaussian Frequency Shift Keying) modulation allows for inter-
ference-free operation alongside other wireless devices in the 2.4 GHz band
(e.g. Wi-Fi and Bluetooth). When transmitting, the system will alternate
between 78 frequencies of the 2.4 GHz range and skip any frequencies
already used by other units.
A single transmitter transmits all 512 DMX channels to a maximum of 512
receivers. It is possible to operate 6 transmitters at the same time in order to
control a total of 3072 DMX channels. The maximum range is 400 m. The
system operates in the ISM band in the 2.4 GHz range and is license-free
and generally approved in EU and EFTA countries.
The unit requires an operating voltage of 5 V direct current supplied via
compatible Eurolite devices with QuickDMX port.
EU Declaration of Conformity
Steinigke Showtechnic GmbH hereby declares that this product EUROLITE
QuickDMX USB Wireless Transmitter/Receiver, item number 70064704, is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU. The complete Declaration of Conformity can be found
at www.steinigke.de.
To Next Page
Loading...