10
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
Getting Started (Cont.)
Stand Assembly (for freestanding use)
If you want to use your heater freestanding, follow the instructions below for
attaching the stand feet.
• Place a soft towel on a table or benchtop and carefully place the heater
upside down. Be gentle so you won’t damage the heater.
• Attach a stand onto the base of the panel heater at each side. Secure the
feet with the self-tapping screws provided, taking care to ensure that they
are located correctly in the bottom ends of the heater side mouldings.
WARNING!
Do not connect the heater to the power supply until it is securely mounted
to the wall or until the stands are securely fitted.
Correct installation is required for safe and reliable operation.
To Next Page
Loading...
