9
4. MANUAL RELEASE
5. MAINTENANCE
Periodic maintenance is needed. We suggest checking the state of lubrication and tightness of the anchoring
screws on the operator as well as the good operation of all safety devices.
6. PHASING OUT AND DISPOSAL
DO NOT DISPOSE OF IN NATURE!
Some components may contain hazardous waste. They must, thus, be removed and turned in to licensed firms
for their disposal. Before acting always check the local laws on the matter.
Insert the key into the lock barrell and turn it at 90° (see pic. R), then turn the complete lock system at 90° as well (see pic. S).
Now you can manually open and close your gate.
If you wish to lock back your system, simply put the lock system to its original position and turn the key at 90°.
It doesn't matter if the gate is opened, closed or whatever. At the first start command the control unit will go back to its default values.
Pic. R Pic. S
Via Neive 77, 12050 Castagnito (CN)
+39 0173 210132 www.euromaticgate.net
To Previous Page
Loading...