Need help?Do you have a question about the EuroMini 10V6.e and is the answer not in the manual?
General| Brand | EuroMini |
|---|---|
| Model | 10V6.e |
| Category | Security System |
| Language | English |
Provides a basic overview of the different components of the EURO mini control panel.
Details the layout and terminal connections of the EURO mini's printed circuit board.
Explains the tamper spring mechanism and how to link out tamper connections.
Details the connection of the transformer and the recommended battery for the EURO mini.
Explains how to connect and address up to four contemporary LCD keypads to the RS485 terminal.
Details connecting and addressing internal tag readers (EUR-068) to the RS485 terminal.
Illustrates wiring for door contacts/detectors using double pole alarm connections.
Shows how to connect tamper circuits for detectors using double pole wiring.
Details resistor input wiring for DEOL with 4K7 Alarm and 2K2 Tamper.
Details resistor input wiring for DEOL with 4K7 Alarm and 4K7 Tamper.
Describes the wiring for a +12V siren, noting negative applied outputs.
Explains how to connect 1 or 2 16ohm speakers for keypad sound output.
Shows how to connect a typical 12V dialler as an example of system output configuration.
Outlines compliance with EMC, Low Voltage Directives, and TS50131-3:2003 standards.
Details the product warranty conditions, including duration and Castle Care Tech's rights.
To Next Page