Eurowater SE 30 User Manual

SILHORKO-EUROWATER A/S Phone + 45 86 57 12 22
DK-8660 Skanderborg info@eurowater.com
Denmark www.eurowater.com
Our World is Water
Instructions L30C-30A-UK-02-01
QUICK GUIDE
SE30 CONTROL PANEL
SOFTWARE VERSION 30ROS02___
1. DATA
Nominal operating voltage............................................................. 24 VDC
Allowed supply voltage.......................................................20.4-28.8 VDC
Maximum current consumption ..................................................... 80 mA at 24 VDC
Digital input.................................................................................... 12
Digital output, direct......................................................................... 9
Maximum current, reserve.......................................................... 1 A
Voltage ..........................................................................20.4-28.8 VDC
Digital output, potential-free ............................................................ 5
Maximum current........................................................................ 1 A
Maximum voltage ..................................................................... 30 VDC
Total maximum current, outputs...................................................... 5 A
Analog input..................................................................................... 2 4-20 mA
Analog output .................................................................................. 1 4-20 mA
Protection class ..........................................................................IP54
Ambient temperature..................................................................0-50 °C
Storage temperature .........................................................-20 to +60 °C
Relative humidity ......................................................................10-80 %, non-condensing

Eurowater SE 30 Specifications

General

Brand	Eurowater
Model	SE 30
Category	Control Panel
Language	English

Summary

Data Specifications

Electrical Connection and Installation

Input and Output Terminals

Details of terminal connections for inputs and outputs on the control panel.

Indicator Lights

Description and function of the indicator lights on the control panel.

Fuse Protection

Specifications for fuses F1 (CPU) and F2 (outputs).

Tank Connection Wiring

Analog Input/Output Wiring

Details for analog inputs (conductivity, available) and analog outputs.

Digital and Control Signal Wiring

Wiring for digital inputs, outputs, and control signals like water meter, solenoid valves.

Configuration Menu Navigation

Menu Navigation and Input

How to navigate menus, enter values, and confirm selections using the keypad.

Accessing Configuration Settings

Procedures for entering the configuration menu using specific access codes.

Operation and Display Menu

Operation Menu Overview

Description of the operation menu states during plant operation.

Alarm Handling and Displays

Information on how alarms are displayed and acknowledged.

Display Descriptions

Operation Menu Display Details

Detailed descriptions of specific displays shown in the operation menu.

Parameter Settings

RO Plant Parameters

Settings for RO plant parameters like limit value, pre-rinse, and quality rinse.

Softening Plant Parameters

Settings for softening plant parameters like backwash, draw, and rinse duration.

Special and Service Functions

Special Functions

Calibration of conductivity and analog output, tank number, and output configuration.

Service Functions

Manual control steps, manual stop, reset capacity, factory settings, and language selection.

International Service and Contact