EVAPCO ATC-E Rigging And Assembly Instructions

6
ATC-E, ATC-ES, ATWB, eco-ATWB and eco-ATWB-E Evaporative Condensers and Closed Circuit Coolers
FACTORY INSTALLED
EQUALIZER FLUME BOX
VERTICAL
SPLASH
GUARD
F
LUME
BOX
DRIP CHANNEL
FILLER CAP
CHANNEL
SIDE PANEL
VERTICAL
SPLASH GUARD
VERTICAL
SPLASH
GUARD
EQUALIZER FLUME BOX
SEALER TAPE
DRIP CHANNEL
R
ETAINING CLIP
Figure 3a - Drip Channel and Vertical Splash Guard Installation
DRIP CHANNEL
SECTION
SEALER TAPE
5/16” (8mm)
TAPPER
DRILLING IS
REQUIRED
IN THE FIELD
FOR THESE
HOLES
DRIP
CHANNEL
RETAINING
CLIP
END PANEL
TAPPERS (GALVANIZED)
OR STAINLESS STEEL
BOLTS (STAINLESS)
Figure 3 - Joining Bottom Sections – Multi Cell Units

EVAPCO ATC-E Specifications

General

Brand	EVAPCO
Model	ATC-E
Category	Accessories
Language	English