EasyManua.ls Logo

evapolar evaSMART EV-3000 - Control Panel and Menu; Menu Navigation and Modes

evapolar evaSMART EV-3000
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19 20
8.7.
CHANGE EVERY
3-6 MONTHS
7.
CLEANING
The cleaning period depends on the level of dust in the area you use
your air cooler in.
The front grill and the internal area can be wiped with a soft cloth.
A cleaning procedure can be carried out, when
The device is totally dry
STORAGE DURING LONG PERIODS OF NO
USAGE
If you’re not intending to use the device for more than 5 days, we
strongly recommend the following:
• Dry the device and clean it (as described above).
• Place the device into an appropriately sized package for storage
(original package is recommended). Store the device in a dry space
at room temperature.
TRANSPORTATION
Before any kind of transportation, the device should be disconnected
from the power source.
Do not transport the device long distances with a wet cartridge;
please see “Storage during long periods of no usage” section. For
shorter distances, make sure that the device with a wet cartridge is
not isolated in a box or bag with no airflow.
We strongly recommend drying the device totally before cleaning,
storage, and long-distance transportation. To do this, you need to
empty the water tank and set the device to run on the maximum fan
speed for at least 4-5 hours to dry the water out from the internal
reservoir section.
MAINTENANCE: CLEANING,
STORAGE, TRANSPORTATION
The device is disconnected from the power source
The cartridge is extracted
! Do not wipe the inside of the cartridge, just its outer plastic body.

Related product manuals