Evco c-pro 3 nano plus User Manual

EVCO S.p.A. c-pro 3 nano | Hardware Manual ver. 1.0 | Code 114CP3NE104
page 25 of 26
c-pro 3 nano
Programmable controllers (up to 25 I/O)
Hardware Manual ver. 1.0
PT - 20/16
Code 114CP3NE104
N.B.
The device must be disposed of according to local regulations
governing the collection of electrical and electronic waste.
This document and the solutions contained therein are the intellectual property
of EVCO and thus protected by the Italian Intellectual Property Rights Code
(CPI). EVCO imposes an absolute ban on the full or partial reproduction and
disclosure of the content other than with the express approval of EVCO. The
customer (manufacturer, installer or end-user) assumes all responsibility for
the configuration of the device. EVCO accepts no liability for any possible
errors in this document and reserves the right to make any changes, at any
time without prejudice to the essential functional and safety features of the
equipment.

Evco c-pro 3 nano plus Specifications

General

Brand	Evco
Model	c-pro 3 nano plus
Category	Controller
Language	English