Need help?Do you have a question about the Evco c-pro 3 micro CHIL Series and is the answer not in the manual?
General| Brand | Evco |
|---|---|
| Model | c-pro 3 micro CHIL Series |
| Category | Controller |
| Language | English |
Explains the password system for accessing different menu levels and functions, ensuring secure operation.
Covers the Installer Menu (Level 3) for configuring functionalities, alarms, and settings of the machine.
Explains the Constructor Menu (Level 4) for machine configuration, I/O settings, and advanced parameters.
Lists all configuration parameters with their codes, descriptions, default values, and menu access paths.
Explains how to set and change the unit's operating mode (Chiller/Heat Pump) through various procedures.
Details the compressor control types: lateral-band and zero energy band, with operational logic.
Covers compressor status, rotation procedures, and protection timings for reliable operation.
Explains condenser control methods including modulating and single-stage fan control for pressure regulation.
Covers the defrosting procedure for heat pump units, including activation, interruption, and dripping time.
Details the free-cooling function for energy savings, including enabling, regulation, and control valve operation.
Manages low and high temperature alarms, including set points, delays, and management modes.
Covers high-pressure, low-pressure, and transducer alarms, detailing their management and reset procedures.
Differentiates between manually and automatically resetting alarms and their management.
Provides a comprehensive list of all managed alarms, their types, consequences, and relevant parameters.
To Next Page