Evco c-pro 3 Series - User Manual

EVCO S.p.A. c-pro 3 | Hardware manual ver. 2.0 | Code 114CP3E204
page 1 of 86
c-pro 3
PROGRAMMABLE CONTROLLERS
ENGLISH
HARDWARE MANUAL ver. 2.0
CODE 114CP3E204

Evco c-pro 3 Series Specifications

General

Resolution	0.1 °C
Accuracy	±0.5°C
Serial Communication	RS485
Operating Temperature (2)	-10°C to +50°C
Input Voltage	24 VDC
Output Voltage	24 VDC

Summary

INTRODUCTION

1.1. Introduction

Overview of the c-pro 3 family of programmable controllers and their features.

DESCRIPTION

2.1. Description c-pro 3 hecto and c-pro 3 hecto+

Details and illustration of the c-pro 3 hecto and c-pro 3 hecto+ controller parts.

2.2. Description c-pro 3 mega

Details and illustration of the c-pro 3 mega controller parts.

2.3. Description c-pro 3 NODE mega

Details and illustration of the c-pro 3 NODE mega controller parts.

2.4. Description c-pro 3 EXP hecto and c-pro 3 EXP hecto+

Details and illustration of the c-pro 3 EXP hecto and c-pro 3 EXP hecto+ expansion parts.

SIZE AND INSTALLATION

3.1. Size c-pro 3 hecto, c-pro 3 hecto+, c-pro 3 EXP hecto and c-pro 3 EXP hecto+

Physical dimensions and module count for specific c-pro 3 models.

3.2. Size c-pro 3 mega

Physical dimensions and module count for the c-pro 3 mega controller.

3.3. Size c-pro 3 NODE mega

Physical dimensions and module count for the c-pro 3 NODE mega controller.

3.4. Installation

Instructions for mounting devices on a DIN rail.

ELECTRICAL CONNECTION

4.1. Electrical connection c-pro 3 hecto and c-pro 3 hecto+

Details wiring for c-pro 3 hecto and c-pro 3 hecto+ models.

4.2. Electrical connection c-pro 3 mega and c-pro 3 NODE mega

Details wiring for c-pro 3 mega and c-pro 3 NODE mega models.

4.3. Electrical connection c-pro 3 EXP hecto and c-pro 3 EXP hecto+

Details wiring for c-pro 3 EXP hecto and c-pro 3 EXP hecto+ expansions.

4.4. Additional information for electrical connection

General advice and precautions for electrical connections.

USER INTERFACE

5.1. Keyboard

Explains the function of each button on the controller's keyboard.

5.2. Signalling LEDs

Explains the meaning of the device's status indicator LEDs.

CONFIGURATION

6.1. Configuring a programmable controller

Step-by-step guide for configuring controllers via built-in or external interfaces.

6.2. Configuring an I; O expansion

Guide to configure I/O expansions via a built-in controller.

6.3. Configuring a device through an user interface (Vgraph, Vtouch or Vroom)

Guide to configure devices using external user interfaces.

6.4. List of configuration parameters

Detailed list of configuration parameters for various c-pro 3 models.

USER INTERFACES

7.1. Preliminary information

Introduction to using user interfaces with blind controllers.

7.2. Vgraph

Introduction to the Vgraph user interface and its features.

7.3. Vtouch

Introduction to the Vtouch user interface and its features.

7.4. Vroom

Introduction to the Vroom user interface and its features.

ACCESSORIES

8.1. Programming kit EVIF20 TUXI

Introduction to the EVIF20TUXI programming kit for device programming.

8.2. Programming key EVKEY10

Introduction to the EVKEY10 programming key for parameter management.

TECHNICAL DATA

9.1. Technical data

Comprehensive technical specifications and data for all c-pro 3 models.