Evco c-pro 3 OEM User Manual

EVCO | 06.08.2021 | AZ | 1114CP3OEE104
c-pro 3 OEM
Hardware manual:
Programmable controls
| Flexible, modular, expandable
| 21 inputs and outputs
| Variety of communications ports
| Models with management of Pulse electronic
expansion valves
| Models with integrates user interface or in blind
version
| Standard 8 DIN module format
| OEM oriented
Refrigeration
units
Chiller Display
cabinets
Applications

Evco c-pro 3 OEM Specifications

General

Operating Temperature	-10°C to +50°C
Inputs	4 digital inputs
Outputs	4 digital outputs
Serial Communication	RS-485
Protection	IP65 with frontal gasket

Summary

Applications

Purchasing Codes

Open Frame Version Purchasing Codes

Specifies purchasing codes for c-pro 3 OEM open frame models.

Plastic Housing Version Purchasing Codes

Specifies purchasing codes for c-pro 3 OEM plastic housing models.

Dimensions

Open Frame Version Dimensions

Provides physical dimensions for the open frame controller.

Plastic Housing Version Dimensions

Provides physical dimensions for plastic housing controllers.

Installation

Open Frame Version Installation

Instructions for installing the open frame controller.

Plastic Housing Version Installation

Instructions for installing plastic housing controllers.

Electrical Connections

Electrical Connection Warnings

Important safety warnings for electrical connections.

Open Frame Version Connector Description

Description of connectors for the open frame model.

Plastic Housing Version Connector Description

RS-485 MODBUS and CAN Network Termination

User Interface Version Configuration

User Interface Controls and Navigation

Description of keys and their functions on the user interface.

Device Power Management

Procedure for switching the device ON and OFF via the interface.

Menu and Parameter Access

Steps to navigate menus, configure parameters, and set passwords.

LED Descriptions

Power Supply and Run LEDs

Explanation of the power supply and run status LEDs.

System Alarm and Communication LEDs

Explanation of system alarm and communication status LEDs.

Settings Menu - Info Parameters

Device Information Parameters

Details on parameters for project, firmware, hardware, and software information.

Settings Menu - Languages Parameters

Language Selection Parameters

Parameters for selecting the user interface language.

Settings Menu - Parameters (1)

Analog Port Configuration Parameters

Configuration options for analog input ports (type of probe).

Settings Menu - Parameters (2)

Analog Port Time-out and Signal Parameters

Settings for analog port time-out, signal type, and frequency.

General Device Settings

Parameters for backlight, contrast, and date separator.

Settings Menu - Networks Submenu CAN Bus

CAN Bus Node Address and Master Settings

Configuration for CAN node address, master mode, and baud rate.

Settings Menu - Networks Submenu UART1

UART1 Communication Parameters

Configuration for MODBUS communication parameters on UART1.

Settings Menu - Networks Submenu UART2

UART2 Communication Parameters

Configuration for MODBUS communication parameters on UART2.

Settings Menu - Password Parameters

Access Level Password Configuration

Settings for passwords and enabling/disabling access levels.

Accessories - Serial Interfaces

RS-485/USB Serial Interface

Details on the RS-485/USB serial interface for parameter management.

INTRABUS/RS-485 Serial Interface

Details on the INTRABUS/RS-485 serial interface for signal conversion.

Technical Data

Device Specifications

General specifications for the control device, dimensions, and mounting.

Connection Cable Lengths and Operating Conditions

Max cable lengths, operating temperature, humidity, and compliance.

Technical Data - Electrical Characteristics

Input/Output Specifications

Details on analogue inputs, digital inputs, and analogue outputs.

Signal and Power Specifications

Specifications for PWM signals and power supply.

Technical Data - Digital Outputs and Displays

Digital Output Types and Insulation

Description of digital output configurations and reinforced insulation.

Display and Communication Ports

Information on available displays and communication port types.