Evco c-pro 3 OEM - Settings Menu - Info Parameters; Device Information Parameters

EVCO | 06.08.2021 | AZ | 23114CP3OEE104
c-pro 3 OEM - Hardware manual
Settings menu
Keys description and parameters settings
WARNINGS
Turn off the power after changing the conguration
Menu “Info” parameters
N. Param. Def. “Info” menu Min/max
1 PROJ - Application project:
– projet
– version
– revision
-
2 FW - Firmware:
– code
– version
– revision
-
3 HW - Hardware:
– version
– revision
– generic (G)
special (S)
-
4 SW - UNI-PRO 3 development environment:
– version
– revision
-
5 SN - Serial number and results of the
production tests
-
6 MASK - Mask -
7 DATE - Date and time of the latest compilation -
Menu “Info” keys
Keys Instructions
Touch UP and DOWN keys for 2 seconds:
the display will show the main menu
Touch UP or DOWN keys to see the menu “Info”
Touch ENTER key to select the menu
Touch UP or DOWN keys to see the parameters
Touch ESC key few times to return to the previous
displays