To Next PageTo Next Page
Need help?Do you have a question about the Evco EVFTFT618 and is the answer not in the manual?
General| Brand | Evco |
|---|---|
| Model | EVFTFT618 |
| Category | Controller |
| Language | English |
EVFTFT618 is a digital controller for retarder-proofer cabinets/cells.
Details the aspect and parts of the EVFTFT618 user interface.
Details the aspect and parts of the EVFTFT618 control module.
Important warnings and precautions for the installation of the device.
Illustrates the electric connection diagram for the EVFTFT618.
Essential warnings and precautions for electrical connections.
Step-by-step guide for commissioning the EVFTFT618 device.
Instructions on how to switch the EVFTFT618 device on and off.
Describes the pre-selection page as the starting point for user navigation.
Guide to setting and executing manual cooling or heating cycles.
Instructions for setting and saving automatic retarder-proofer cycles.
Details the navigation system during automatic cycle execution.
Describes how temperature regulation works with neutral areas.
Details the process of generating cold using the cooling circuit.
Explains how heat is generated using heating elements.
Details compressor activation, delays, and protection mechanisms.
Explains the management of pump-down cycles and interaction with compressor.
Details evaporator fan control via PWM or digital output.
Explains automatic and manual defrosting procedures.
Details the management of heating elements and step heating.
Details humidity management with or without a transducer.
Explains dehumidification management via fan or cooling plant.
Details condenser fan control and activation conditions.
