EVCO S.p.A. EVFTFT618 | Installer manual ver. 2.2 | Code 144FTFT618E224
Page 54 of 62
15 TECHNICAL DATA
15.1 Technical data
Purpose of the device: retarder proofer controller
Execution:
user interface control module
board without cover behind a
Plexiglas sheet.
board without cover.
Dimensions:
user interface control module
200.0 x 135.0 x 28.0 ±0.6 mm
(7.874 x 5.314 x 1.102
±0.023 in; L x H x D).
166.0 x 116.0 x 44.0 mm (6.535 x
4.566 x 1.732 in;
L x H x D).
Installation:
user interface control module
back panel via studs. on flat surface, with spacers.
To Next Page
Loading...
