Evco EVFTFT618 User Manual

EVCO S.p.A. EVFTFT618 | Installer manual ver. 2.2 | Code 144FTFT618E224
Page 16 of 62
2. Press and release the ON/STAND-BY (1) key.
If the duration of power supply cut-off was such to cause the clock error, the board will display the clock setting
screen directly. The controller does not control the coherence of the data entered, it is the user's job to control
the data are entered correctly.
5.3 Switching the Device On/Off
Operate as follows:
1. Press and release the ON/STAND-BY key.
5.4 The display
The display will be off during the STANDBY status. The LEDs relative to the active keys are on.
During the ON status, the device will display the date, real time, cabinet temperature and the possible functions that can
be selected.

Evco EVFTFT618 Specifications

General

Brand	Evco
Model	EVFTFT618
Category	Controller
Language	English