EVCO S.p.A. EVFTFT618 | Installer manual ver. 2.2 | Code 144FTFT618E224
Page 53 of 62
14.4.3 Dimensions
The following drawing illustrates the EVIF20SUXI dimensions; these are expressed in mm (in).
14.4.4 Connection to the device
Operate as follows:
1. Cut the device power supply off.
2. Connect the device RD-485 serial port to the EVIF20SUXI RS-485 type serial port.
3. Insert one end of the USB cable into the EVIF20SUXI USB port.
4. Connect the other end of the USB cable to the USB connector of the Personal Computer.
To Next Page
Loading...
