Evco c-pro 3 OEM - Settings Menu - Networks Submenu CAN Bus; CAN Bus Node Address and Master Settings

EVCO | 06.08.2021 | AZ | 27114CP3OEE104
c-pro 3 OEM - Hardware manual
Menu “Parameters (2)” parameters
N. Param. Def. “Parameters” menu Min/max
38 Year
format
YY Year format YY = two digits (e.g. 19)
YYYY = four digits (e.g. 2019)
39 Date
format
D-M-Y Date format D-M-Y = day, month and year
M-D-Y = month, day and year
Y-M-D = year, month and day
40
Time Char
Separator
: Time separator ASCII character -
41
Time With
Sec
YES Time displayed with seconds YES = yes
NO = no
42 Time
AM/PM
NO Time format NO = 24 h (e.g. 15:20)
YES = 12 h (e.g. 3:20 PM)
Menu “Networks” - Submenu “CAN Bus” parameters
N. Param. Def. “CAN Bus” submenu Min/max
43 MyNode 1 Local CAN node or device address
44 Master YES Enabled to function as master in a CAN
network
YES = yes
NO = no
45 Baud 20K Baud rate of the CAN-type communication 20K = 20.000 baud
50K = 50.000 baud
125K = 125.000 baud
500K = 500.000 baud
46 Timeout 5 Remote CAN-type communication
timeout, i.e., communication with the
other network elements
After the time set with this parameter has elapsed with no CAN-type
communication with an element, the element is disabled
47 Network
Node
[1] 99 Address of the CAN nodes or of the other
network elements
(e.g. [1] 2)
[1] = node
2 = node address
48 TSEG1 - - Reserved
49 TSEG2 - - Reserved
50 SJW - - Reserved
51 BTR - - Reserved
Menu “Networks” keys
Keys Instructions
Touch UP and DOWN keys for 2 seconds:
the display will show the main menu
Touch UP or DOWN keys to see the menu
“Networks”
Touch ENTER key to select the menu
Touch UP or DOWN keys to see the submenu
Touch ENTER key to select the submenu
Touch UP or DOWN keys to set-up the value
Touch ENTER key to conrm the value
Touch LEFT or RIGHT keys to see the other screen
Touch ESC key few times to return to the previous
displays